Common defects during the use of wing gate are: security protection device problems, real-time alarm system problems, LED counting problems and intelligent control and handling problems. If you have the above problems, the use of units can be based on the following maintenance solutions to solve, do not have to ask the wing gate manufacturers to come home to amend. The wing gate through a variety of equipment to read and write equipment, safety devices, real-time alarm system, LED count display and direction of the interface, with the harmony wing gate intelligent channel system control and management. Wing disease repair can go through such four processes.
1, determine the limit photoelectric switch is illuminated by light (usually refers to the debugging of outdoor equipment): Detection methods: cover the chassis cover; wing gate problems see if the need to open the chassis or the machine cover, please use the dark color opaque objects covered limit photoelectric switch debugging !!
2, Limit photoelectric switch and connection are normal motherboard damage.
3, check the limit photoelectric switch and the motherboard connection is firmly connected;
4, test wing gate limit photoelectric switch:
(1) Check the zero position, left open in place, wing defects Check the right to open the limit photoelectric switch is powered! Check 4PIN thread loose or poor contact;
(2) enter the commissioning menu P00, wing brake disease View rolling brake shaft driven by the light barrier sequentially spaced left open in place, zero and right to limit the position of the photoelectric switch optocoupler, optocoupler light interval indicator strain Bright and output voltage is + 12V, or limit the photoelectric switch is damaged.